The main object for this revision has been to rearrange the material to better direct the thought process of the user when applying Geometric Dimensioning and Tolerancing. The subject matter of Sections 1 through 4 remains the same as in the previous revision. Sections 5 and 6 were formerly titled “Tolerances of Location” and “Tolerances of Form, Profile, Orientation, and Runout.” The new order following Section 4, Datums, is Section 5, Tolerances of Form; Section 6, Tolerances of Orientation; Section 7, Tolerances of Location; Section 8, Tolerances of Profile; and Section 9, Tolerances of Runout. When applying GD&T the first consideration is to establish a datum reference frame based on the function of the part in the assembly with its mating parts. After the datum reference frame is established, the form of the primary datum feature is controlled, followed by the orientation and/or location of the secondary and tertiary datum features. After the datum features are related relative to each other, the remaining features are controlled for orientation and location relative to the datum reference framework. Further rearrangement has occurred within each section so that the basic concepts are presented first and then the material builds to the more complex. The subcommittee believes this will aid the user of the Standard to better understand the subject of Dimensioning and Tolerancing.
Hotfile links
Mega Links
No comments:
Post a Comment